This document explains how to change the application binding in IIS for the Bold BI version above 4.1.36. Check this to change the IIS binding for the Bold BI version below 4.1.36. Check this to change the IIS binding for the Bold BI version 4.1.36.
Follow these steps to change the application binding information:
Add a new binding to Bold BI Enterprise edition on IIS as shown in the following image.
Example: 172.31.176.1
Now, navigate to the site settings page of the UMS application using below new binding and update the new binding information as shown in the following image.
http://172.31.176.1/ums/administration
Now, navigate to the ums site listing page and edit the site using the following new binding and update the new binding information as shown in the following image.
http://172.31.176.1/ums/sites
Click Next
and you need to provide a Password
of the database, which configured for the respective site.
Click Update
, now your site will be running with updated site URL.
IMPORTANT: Do not remove the existing bindings.
NOTE:
- If you have DNS, you can add binding for the DNS instead of IP mentioned here.
- The IIS Express Development Certificate cannot be used to configure the SSL with the IP address or domain. If it is configured with an IP address or domain, Bold BI application will not function properly.
- If you have a valid SSL certificate installed on the server machine for the respective domain, you can configure the bindings with “HTTPS” instead of “HTTP” when updating the new binding information.